首页>>伺服 servo>>JK2M2208两相混合式步进电机驱动器
JK2M2208两相混合式步进电机驱动器
 特点

*平均电流控制,两相正弦电流输出

*交流110V~220V

*光电隔离信号输入、输出

*有过压­﹑欠压­﹑过流­﹑相间短路保护功能

*十六档细分和自动半流功能

*十六档输出相电流设置

*可驱动任何8.0A相电流以下两相、四相混合式步进电机,

*主要适合驱动110mm和130mm两相步进电机

Features

*Averagecurrent control,2 phase sinusoidal output current drive

*supplyvoltage from 110VAC~220VAC

*Opto-isolatedsignal I/O

*Overvoltage,under voltage,overcurrent,phase short cicuit protection

*16channels subdivision and automatic idle-current reduction

*16channels output phase current setting

*Can drive 2 phase and 4phase hybrid stepper motor when phase current less than 6.0A

*mainlyfor 110mm and 130mm 2 phase stepper motor
性能指标

输入电压 交流110V~220V

输出电流 0.5A~8.0A

温 度 工作温度-10°~45°,存放温度-20°~125°

环境湿度 不凝露,不结霜

气 体 禁止有可燃气体和导电灰尘

重 量 1700克

MechanicalSpecification

Input Voltage 110~220V AC

Output current 0.5A~8.0A

Temperature working temperature -10°~45°,stockingtemperature ~20°~70°

Humidity Not condensation , no water droplets

Gas Prohibition of combustible gasesand conductive dust

Weight 1700g

MechanicalDimension (mm)

 

@2013 无锡英财贸易有限公司.All rights reserved[后台管理]